Panasonic Lumix DMC-GH2 Operating Instructions Manual page 123

Recording
• The travel date setting is memorized even if the camera is turned off.
• In order to record the number of days that have passed since your departure, the
[TRAVEL DATE] must be set to [SET].
• If you set a departure date and then take a picture on a date before this departure date, [-]
(minus) is displayed in orange and the day of the vacation that you took the picture is not
recorded.
• If the travel date is displayed as [-] (minus) in white, there is a time difference that involves date
change between the [HOME] and [DESTINATION]. (It will be recorded)
• The [TRAVEL DATE] feature is disabled when recording [AVCHD] motion pictures.
• While recording motion pictures, the [LOCATION] feature is disabled.
• When Intelligent Auto Mode is selected, the [TRAVEL DATE] feature is disabled. Setting of
other Recording Mode will be reflected.
For details on the [SETUP] menu settings, refer to P55.
You can display the local times at the travel destinations and record them on the pictures
you take.
• Select [CLOCK SET] to set the current date and time in advance. (P31)
1 Select [WORLD TIME] from the [SETUP] menu, and then press I_.
• When first using the camera after purchasing it, the [PLEASE SET THE HOME AREA_
message appears. Press [MENU/SET], and set the home area on the screen in step _.
2 Press • to select [HOME], and then press [MENU/SET].
3
4
Press ,/1_ to select the home area, and then press
[MENU/SET].
_) Current time
(_) Time difference from GMT (Greenwich Mean Time)
• If daylight saving time [_] is used at the home area, press
A. Press • again to return to the original time.
• The daylight saving time setting only applies to your "home
area".
Press • to select [DESTINATION] and then press
[MENU/SET] to set.
(_) Depending on the setting, the time at the travel destination
area or the home area is displayed.
5
Press ,/1_ to select the area the travel destination is in @
and then press [MENU/SET] to set.
@ Current time of the destination area
(_) Time difference
• If daylight saving time [_] is used at the travel destination,
press A. (The time advances by one hour.) Press • again to
return to the original time.
• Return the setting to [HOME] when the vacation is finished by performing steps 1,2 and 3.
• If [HOME] is already set, change only the travel destination, and use.
• If you cannot find the travel destination in the areas displayed on the screen, set by the time
difference from the home area.
VQT3A36 1 15