Panasonic Lumix DMC-GH2 Operating Instructions Manual page 155

Playback/Editing
You can enlarge and then clip the important part of the recorded picture.
| Select [CROPPING] on the [PLAYBACK] Mode menu. (P55)
2 Press A/T to select [SINGLE] or [SINGLE IN BURST GROUP], and then press
[MENU/SET].
• When [SINGLE IN BURST GROUP] is selected, press ,_.IVI_III_ to select Burst Picture
Group, and press [MENU/SET] to proceed to step 3.
3 Press "_/1_ to select the picture, and then press [MENU/SET].
4 Use the rear dial and press •ITI_III_ to select the parts to be cropped.
s,_,, Rear dial (right): Enlargement
Rear dial (left): Reduction
,L/V/_I/I_ : Move
5 Press [MENU/SET].
6
Press • to select [YES] and then press [MENU/SET].
• Press [_] to return to the menu screen.
• Depending on the cut size, the picture size of the cropped picture may become smaller than
that of the original picture.
• The picture quality of the cropped picture will deteriorate.
• It may not be possible to crop pictures recorded with other equipment.
• The [CROPPING] feature is disabled during the following conditions:
- Motion pictures
-Pictures stamped with [TEXT STAMP]
-Pictures taken with [RAWmI=],[RAW=.*.] or [RAW]
• Information regarding the Face Recognition in the original picture will not be copied to images
having undergone [CROPPING],
You can convert pictures taken with a [1_] aspect ratio to a [1_!_1],a [Lq[_l]or a [nL'l] aspect ratio.
1 Select [ASPECT CONV.] on the [PLAYBACK] Mode menu. (P55)
2 Press •/T to select [SINGLE] or [SINGLE IN BURST GROUP], and then press
[MENU/SET].
3 Press •/V to select [1_!_1],[Lqik'l] or [Ira] and then press [MENU/SET].
• When [SINGLE IN BURST GROUP] is selected, press ,i.IVl_lll_ to select Burst Picture
Group, and press [MENU/SET] to proceed to step 4.
4, Press "_/1_ to select a picture taken with [1_] aspect ratio, and then press
[MENU/SET].
5 Press ,_/1_ to determine the horizontal position, and press
[MENU/SET] to set.
• Use A/V to set the frame position for pictures rotated vertically.
6
Press • to select [YES] and then press [MENU/SET].
• Press [_] to return to the menu screen.
VQT3A36
147