Panasonic Lumix DMC-GH2 Operating Instructions Manual page 156

Playback/Editing
• After converting the aspect ratio, the picture size may become larger than that of the original
picture.
• You may not be able to convert pictures taken on other equipment.
• The [ASPECT CONV.] feature is disabled during the following conditions:
- Motion pictures
-Pictures stamped with [TEXT STAMP]
- Pictures taken with [RAW__h], [RAW-*.] or [RAW ]
• information regarding the face recognition in the original picture will not be copied to images
having undergone [ASPECT CONV.].
This mode allows you to automatically display pictures vertically if they were recorded
holding the camera vertically or rotate pictures manually in 90 ° steps.
1
2
3
Select [ROTATE] on the [PLAYBACK] Mode menu. (P55)
• The [ROTATE] function is disabled when [ROTATE DISP.] is set to [OFF].
Press ,/1_ to select the picture and then press [MENU/SET].
Press A/• to select the direction to rotate the picture and
then press [MENU/SET].
_: The picture rotates clockwise in steps of 90 °.
_._: The picture rotates counter-clockwise in steps of 90°.
• Press [_] to return to the menu screen.
1 Select [ROTATE DISR] on the [PLAYBACK] Mode menu. (P55)
2 Press • to select [ON] and then press [MENU/SET].
• The pictures are displayed without being rotated when you select [OFF].
• [ROTATE DISR] can only be used with a lens (P18) compatible with the Direction Detection
Function (P36).
• When you play back pictures on a PC, they cannot be displayed in the rotated direction unless
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows
recording information etc. to be added. It was established by "JEITA (Japan Electronics and
information Technology industries Association)".
• It may not be possible to rotate pictures that have been recorded with other equipment.
• During Multi Playback (P40) the display rotation feature is disabled.
• Rotation correction is limited to 90 degrees - from horizontal to vertical or vice-versa.
148 VQT3A36