Panasonic DMC-LC40PP Operating Instructions Manual page 84

g to a PC
[Preparation]
Only if using Windows @98 or Windows @98
Second Edition, start the supplied CD from
PC and install the USB driver.
• For further information, re-_dthe supplied
operating instructions for USB connection kit.
Connect the camera to PC via supplied
USB cable.
• After
inserting
the memory card intothe
camera, set the operationalmode dial to
playback [1_1] and turn the power switch to
[ON].
The ddve is shown on the [My computer]
folder.
• If it is the first time you are connecting the
camera to PC, the required driver is installed
automatically in order to let the camera be
recognized by the Windows Plug and Play,
then it is shown on the [My computer] folder.
[]
[Macintosh]
The drive is shown on the screen.
When connectir g to a PC it is re(ommended that
you use the AC ada_or as the power source.
• When connecting the PC, the display of the LCD
monitor is set to off. In this case, the status
indicator lights. Moreover, when the PC
accesses the card, the flash indicator also lights.
84