Panasonic DMC-LC40PP Operating Instructions Manual page 30

Hide thumbs Also See for DMC-LC40PP:
Table of Contents

Advertisement

the Last Picture (Review)
After taking a picture, when auto review (P78)
is set to [ON], the captured picture is
displayed on the LCD monitor for about 2
seconds, but you can also check the picture
by following the methods shown below.
After taking a picture, press the
[REVIEW/SET] button.
• The last captured picture is displayed for
about 3 seconds. If you press the
[REVIEW/SET] button again, the captured
picture is zoomed 4 times (_)) and 8 times if
you press once again.
Erasing the captured picture during the
review
2
Press the [MENU] button.
3
When the message [DELETE THIS
PICTURE?]
is displayed,
press A/V
to select [YES].
®
1
4
Press the [REVIEW/SET] button.
• The picture is erased.
• Once erased, pictures cannot be recovered.
3
| I]:li =1I_!.'11 _ [el l:
IDELETETHIS PICTURE?}
SETj
• When using the burst mode [_
], you can see
only the first picture with the review.
• In motion image mode [_,
Review cannot be
used.
• Once you turn off the camera or rotate the REC
mode dial, you cannot use Review function.
30

Advertisement

Table of Contents
loading

Table of Contents