Panasonic DMC-LC40PP Operating Instructions Manual page 78

g the Auto Review
Recording with the auto review set to [ON],
the recorded picture is automatically
displayed on the LCD monitor for about 2
seconds.
[Preparation]
Set the operational mode dial to REC mode
(single mode [E_] or burst mode [E_jj]).
1
Press the [MENU] button.
1
2 Press I_ to open the setup menu.
3
Press A/T to select [AUTO REVIEW].
4 Press 41/1_ to select [ON].
2,3
5 Press the [MENU] button.
[_]_ |fll.-tal_J-_, • The menu willdisappear.
!,-"]::1 II ::{e,}l _-_"1:1 _ 1_ ::);q I _ _ I
• In burst mode [E_ ] or auto bracket, only the first recorded picture is displayed.
• Even when setting the auto review to [ON], it is not available in motion image mode [_].
• When recording in burst mode [[_], auto bracket, TIFF or still picture with audio modes,
the auto review is set to [ON].
78