the Battery
[]
5
1
Set the power switch to [OFF].
2
Insert the battery into the camera.
(P13)
3
Open the terminal door.
4
Insert the connection
plug of the AC
adaptor into the DC IN socket of the
camera.
i THE S_KET
OUTLET
SH__ALL
B_E_*_'_
INSTALLED
NEAR THE EQUIPMENT
AND_
SHALL BE EASILY ACCESSIBLE.
5
Plug the AC adaptor into the
electrical outlet.
• The green status indicator (_) blinks and
charging starts.
6
When the status indicator stops
blinking, charging is complete.
• After charging is finished, remove the AC
adaptor from the electrical outlet and then
remove the connectingplug from the DC IN
socket.
•
Battery indicator
The remaining battery power is displayed on the LCD monitor. (This is not displayed
when using AC adaptor)
: The battery power is sufficient
: The remaining power is a little low
_'_---"1: The remaining power is low
-_!(_-
: Recharge or replace the battery
14