Panasonic DMC-LC40PP Operating Instructions Manual page 81

tting the File
2,3
[* _iltLI={l] |_' I_,'1 _111| _1
O: :/i=_
4
[_1 _II] _1:1d:l:id_'[:
RESET FILE NO. 1
THE C AMER ?I
Number
As the file numbers are recorded sequentially
by the camera, when you use some cards
(SD Memory Card/MultiMediaCard), it may
happen that the file numbers on your cards
are not in order. Use this function when you
insert a new card and you want to start
recording from the file number 0001, or when
you want to set the file numbers of the
recorded cards in consecutive numbers.
[Preparation]
Set the operational mode dial to REC mode
(single mode [ill] or burst mode [t--I.j.j.j._ ]).
1
Press the [MENU] button.
2
Press I_ to open the setup menu.
3
Press A/T to select [NO. RESET] and
then press I_.
4
When this message is displayed
"RESET FILE NO. IN THE
CAMERA?", press A/_' to select
[YES].
5
Press the [REVIEW/SET] button to
set.
6
Press the [MENU] button.
• The menu will disappear.
/
81