Back Images with a TV Monitor
By connecting
the camera to a television via
the supplied AN cable C), it is possible to
view and play back the recorded
images.
11
[Preparation]
• Turn the camera and the television off.
Connect the AN cable to the AN OUT
socket of the camera.
2
Connect the AJV cable to the video in
and the audio in sockets of the TV.
3
Turn the television
on and select
external input.
4
Turn the camera on and then set the
operational
mode dial to playback
(_)
• The image is displayed on the television.
Yellow: to the video in socket
White: to the audio in socket
•
Viewing images in other countries
When setting [VIDEO OUT] on the menu, you can view images on the TV in other
countries (regions) which use the NTSC or PAL system.
• Even if you set menu selection for [VIDEO OUT] to [PAL], the output signal is still NTSC
system.
• Do not use any other cables except the supplied one.
• Read the TV operating instructions too.
82