Location And Function Of Controls; Support Lock; Feed; Belt Guard - Craftsman 113.213100 Owner's Manual

ocation and function of controWs
1, BELT GUARD .°. Covers Pu!teys and be!t during
operation of drill press.
2, BELT TENSION LOCK. HANDLE,.. Tighteni_g
handles locks motor bracket suppo_ to maintain
correct belt distance and tension.
3. HEAD LOCK SET SCREWS, ° o Locks the head
to the column. ALWAYS have them locked in place
while operating the drill press.
TABLE SUPPORT ° o. Rides on column to support
table. '
4_
5.
6o
COLU_V]N SUPPORT o , . Supports column and
provides mounting holes for column to base
SUPPORT LOCK HANDLE,.. Tightening locks
table support to column. Always have it locked in
place while operating the Drill Press.
7, BASE. o ° Supports Dri!l Press, For additional sta-
bi!ity, holes are provided in base to bolt Drill Press
to bench. (See "Additional Safety Instructiorls Ior
Dril! Presses").
8, SPR_NG CAP o,, Provides means to adjust quill
spring tension.
9, DEPTH POINTER... _ndicates drilling depth and
is located above stop nuts,
10. DEPTH SCALE . . , Shows depth of hole being
dri!led in inches and millimeters.
8
SPRING CAP
9
DEPTH POINTER
1t. COLUMN ,.. Conp, ects head, table, and base or_
a one-piece tube for easy alignment and move-
me_t.
12. BEVEL SCALE . . . Shows degree table is tiited
for bevel ope_at:ons. Scate is mounted on table
support.
13. TABLE BEVEL LOCK . . o Locks the table in any
position frorn 0 -45",
14, TABLE o .. Provides working surface to support
workpiece.
15. FEED HANDLE... Moves the chuck up or down.
One or two of the handles may be removed if
necessary whenever the workpiece is of such u;q-
LJsual shape that Jt interferes with the handies.
16. CHUCK... Holds drill bit or other recommended
_{ccessory to perform desired operations.
17, FEED STOP ROD... Holds step nuts for ddiiing
to specific depths,
18, STOP NUTS... Limits the downward movement
of the quill at any desired point within its travel,
and prevents the pointer from moving upward,
19. ON-OFF SWITCH... Has locking feature to pre-
vent unauthorized and possible hazardous use by
chiidren and others.
!
BELT GUARD
\
FEED
SPRING
ADJUSTMENT
17
FEED STOP ROD
/"
6
SUPPORT LOCK
HANDLE
19
ON-OFF
10
DEPTH SCALE
16_
CHUCK
18
STOP NUTS
12
BEVEL SCALE
13
TABLE BEVEL LOCK
TABLE REMOVED
FOR CLARITY
2
BELT TEMS| ON
LOCK:
HANDLE
3
HEAD LOCK
SET SCRE¼_S
4
TABLE
SUPPORT
15
FEED HANDLE
!4
TABLE
5
COLUMN SUPPO _--_