74
Setting up your TV
Selecting the PIN code
2
Highlight Stable Sound, and then press the OK button.
3
Press the ▲/▼(arrow) buttons to select On.
Stable Sound
The feature is greyed out until DTS TruSurround
Using the Dolby
You can further compress Dolby
you to switch from digital to analog broadcasts at the same dynamic
range.
To use the Dolby
1
Press the MENU button and open the Sound menu.
2
Highlight Dynamic Range Control, and then press the OK button.
3
Press the ▲/▼(arrow) buttons to select On, and then press the OK
button.
v
Selecting the PIN code
A PIN code is necessary for some menus.
v
Enter a new PIN code
1
Press the MENU button and open the Options menu.
2
Highlight Parental PIN Setup, and then press the OK button.
3
Use the number buttons to enter a 4-digit number. Confirm the code.
Forgotten PIN code
While the PIN code entering screen is displayed, press the INFO
button four times within five seconds. The PIN code will be cleared
and you can enter a new PIN code.
TM
cannot be used at the same time as DTS TruSurround
Digital Dynamic Range Control feature
®
Digital Dynamic Range Control:
®
This feature is available when the TV is tuned to a digital RF channel
or an HDMI
input with the Dolby
®
The Parental Control and Locks menu is grayed out if no PIN has
been set.
TM
is turned Off.
Digital dynamic range, allowing
®
Digital signal.
®
TM
.