Adjusting The Audio Quality; Selecting The Optical Audio Output Format; Using The Dolby® Digital Dynamic Range Control Feature - Toshiba 22AV500U Owner's Manual
Integrated high definition lcd television
Hide thumbs
Also See for 22AV500U:
- Owner's manual (60 pages) ,
- Specifications (2 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Chapter 6: Using the TV's features
Adjusting the audio quality
You can adjust the audio quality by adjusting the bass, treble,
and balance.
To adjust the audio quality:
1
Press
M~U
and open the
Audio
menu.
2
Highlight
Audio Settings
and press
8.
3
Press'" or A to highlight the item you want to adjust
(Bass, Treble,
or
Balance).
4
Press .... or
~
to adjust the level.
• .... makes the bass or treble weaker or increases the
balance in the left channel (depending on the item
selected)
•
~
makes the bass or treble stronger or increases the
balance in the right channel (depending on the item
selected)
5
To save the new settings. highlight
Done
and press
8.
To reset the settings to the factory defaults, highlight
Reset
and press
8.
Selecting the optical audio output format
You can use this feature to select the optical audio output
format when you connect a Dolby Digital decoder or other
digital audio system to the
Optical Audio Out
terminal on the
TV (see "Connecting a digital audio system" on page 18).
To select the optical audio output format:
1
Press
M~U
and open the
Audio
menu.
2
Highlight
Audio Setup
and press
8.
3
In the
Optical Output Format
field, select either
Dolby
Digital
or
PCM,
depending on your device.
4
To save the new settings, highlight
Done
and press
8.
To revert to the factory defaults. highlight
Reset
and
press
8.
I
44
Using the Dolby® Digital Dynamic Range
Control feature
This dynamic range control feature causes the ATSC dynamic
range to be further compressed, allowing you to switch from
ATSC to analog broadcasts at the same dynamic range.
To use the Dolby Digital Dynamic Range Control:
1
Press
M~U
and open the
Audio
menu.
2
Highlight
Audio Setup
and press
8.
3
]n
the
Dolby Digital Dynamic Range Control
field, select
Compressed.
When
Standard
is selected. the audio is
output with minimal compression.
4
To save the new settings, highlight
Done
and press
8.
To revert to the factory defaults, highlight
Reset
and
press
8.
Note:
• This item will be grayed out for NTSC signals, Video,
ColorStream, and
PC
inputs.
• The Dolby Digital Dynamic Range Control will function in
relation to Optical Output Format (PCM mode).
Advertisement
Table of Contents
