Self-Cleaning Oven - GE JS998 Owner's Manual

Usingthe self-cleaning oven. OEa,,,ia.oes oom
The oven door must be closed and all controls must be set correctly for the cycle to work properly.
Before a Clean Cycle
We reconm/end venting your kitchen
with an open window or using a
ventilation tim or hood dm-ing
the fi_t sel6clean cycle.
Remoxe tile broiler pan, broiler grid, all
cookware and am' almninmn fi)il fl'om
tile
oxen,
Wipe up heavy soil on flTeoven
bottom. (appearance may vary)
Tile oven racks and convection roasting
rock can be selt_leaned, but tile}' will
darken, lose their luster and become
hard u) slide.
Do not use abrasixes or oxen cleaners.
Clean the top, sides and outside of the
oxen door with soap and water;
Make sm'e tile oven light bulb cover
is in place and the oven light is oil
NOTE:See the Cleaningthe Oven Door
section
in tile Careand Cleaningsection fi>r
instructions on how to clean tile ironer
door outside tile gasket. This area is not
cleaned (hwing the selfk'lean cycle.
IMPORTANT'. Tile health
of some birds
is extremely sensitive to the tirades given
off dining tile seltkleaning cycle of
anv oven, Move birds to
anothei"
well-ventilated room.
How to Set the Oven for Cleaning
Select FEATURES,
[]
[]
[]
Select SELF CLEAN.
Select tile desired self clean.
A S-horn" sell=clean time is
recommended when cleaning small,
contained spills. A sell:clean time of
4 hom_ or longer is recommended
fin" a dirtier oven.
tO (3 l/_) will self clean the oven
fin" 3 hom_.
STO (4 ll_) will self' clean tile oven
fin" 4 hom_.
ADJUST TIMEalh>ws oven to be set
fin" any time between S and 5 hom_.
Input the clean time (to nearest 5
minutes) using tile number pads
and select ENTER.
[] Select
START
Tile door locks automatically. _ will
flash tmtil door is locked. The display will
show the clean time remaining.
It will not be possible to open the
oven door until the temperatm'e drops
below the lock temperature and the
(LOCK) light goes off.
\_]_en tile _ (LOCK)light goes off, you
will be able to open tile do()):
To stop a clean cycle, press the
CLEAR/OFFpad. When
tile _
(LOCK)
light goes off indicating tile oven has
cooled below tile locking temperature,
you will be able to open tile do()):
35