GE JS998 Owner's Manual page 50

Before you call for service...
Troubleshooting -tips
Possible Causes
Arcing between metal Improper spacing between
surfaces in oven while metaJ surfaces mid/or
speedcooking or aluminum foil.
defrosting
What To Do
• See Using the Trivection
TM
Ovensection.
Display shows Wiring
from house to oven • Contact installer or qualified electrician to check
"Miswireddetected"
is incorrect, house wilJu(r to mu re
Option not seen on the Option may be listed • Select MOREto see additional items.
display screen on the next screen.
Hot air from oven When using the cooking • This is normal.
features, hot air will exit
the oven through the vent
located above the door.
Food does not bake or Oven controls
improperly set.
• See the Using traditional bake and roast section.
roastproperlyin the
Shelf position is incorrect • See the
Using traditional bake and
roast section.
oven
or the shelf is not level.
Incorrect cookware or • See the
Using traditional bake and
roast
section.
cookware of hnproper
size being used.
Oven temperature needs • See the Adjust the oventemperature Do it yourself[
adjustment, se(-tiou.
Fooddoesnotbroil Oven controls improperly
set.
• Make sure you select BROIL.
properly
Improper shelf position • See the Broiling Guide.
being used.
Cookware not suited • Use the broiling, l)nn mJd ,grid thnt crone with your oven.
for broiling.
Alumhlum foil used on the • See the Ush)g
traditional bake and
roast section.
broiling pan and grid has
not been fitted properly and
slit as recommended.
In some areas the power • Preheat the broil element fi)r 10 minutes.
(voltage) may be low. • Broil for the low_est_, period of time reconuneuded in
the Broiling Guide.
Clockandtimer
The clock is in the • See the
Settings
se('tiou ti)r the oveu
clock.
do not work or
no clock mode.
displaygoesblank
Conlrols improperly set. • See the
Using the clock and lower oven timer
section.
A fuse ill your home may be • Replace the fl/se or reset the circuit brenker.
blown or the circuit breaker
tripped.
50