Using The A Start Button; Setting Up The A Start Button - Epson Expression 1680 User Manual

Using the a Start Button

You can load a document in the scanner, press the a Start button, and watch while
Presto! PageManager starts and then scans, copies, faxes, or e-mails your document.
If you have the Special Edition model of the Expression 1680, Presto! PageManager
was not included with your scanner.
This section shows you how to set up Presto! PageManager for one-touch scanning.
To use the a Start button with a network scanner, the client computer
must start both the host application and EPSON TWAIN Pro Network.
Pressing the a Start button sends the scanned image to the client
computer currently connected to the scanner server, but does not
automatically launch any applications.
When EPSON Scan Server is running, the Expression 1680 connected to
the scanner server becomes a network scanner available only to remote
users. The scanner server cannot use the a Start button features
described in this chapter, which are only available to a local scanner.

Setting Up the a Start Button

If you didn't install Presto! PageManager, you need to assign an application to the
a Start button before you use it the first time.
If you're running Windows Me, Windows
2000, or Windows 98, whenever you press the
a Start button you'll see a window asking you
to choose which application to launch. To
avoid this window, make sure that only one
application is assigned to the a Start button.
Continue with the next section, "Windows
Me, Windows 2000, and Windows 98."
59
How To Scan