Adjusting The Picture; Adjusting Image Preferences; Selecting The Signal Type - Sharp Notevision PG-M20X Operation Manual

Adjusting the Picture

You can adjust the projector's picture to your preferences with the following picture settings.
Selected Item
Contrast For adjusting the contrast level
Bright For adjusting the brightness of an image
Color For adjusting the color intensity of the image
Tint For adjusting the tones of an image
Sharp For making sharper or softer the contour of an image
Red For adjusting the redness level
Blue For adjusting the blue level
CLR Temp For adjusting the color temperature of an image
Adjusting Image
Preferences
Adjust the Picture menu➝
For adjustments, see page 36.
Note
• "Color", "Tint" and "Sharp" are not dis-
played when selecting INPUT 1 and the
"Signal Type" is "RGB" .
• The picture adjustments can be stored
separately in each input mode.
• When the signal type in INPUT 1 has
been set to Component, "Sharp" can be
adjusted when 480I, 480P, 720P or 1080I
signals are entered.
• To reset all adjustment items, select "Re-
set" and press .

Selecting the Signal Type

This function allows you to select the input
signal type RGB or Component for INPUT1.
Select "Signal Type" in the "Picture"
menu➝ For settings, see page 38.
Note
•
RGB
Set when RGB signals are received.
•
Component
Set when Component signals are received.
-40
Description
button
For less contrast For more contrast
For less brightness For more brightness
For less color intensity For more color intensity
Skin tones become purplish Skin tones become greenish
For less sharpness For more sharpness
For weaker red For stronger red
For weaker blue For stronger blue
Decreases color Increases color
temperature for warmer, temperature for cooler,
reddish, incandescent- bluish, fluorescent-like
like images. images.
button