Progressive Mode - Sharp Notevision PG-M20X Operation Manual

Progressive Mode

This function allows you to select the pro-
gressive display of a video signal. The pro-
gressive display projects a smoother video
image.
Select "Progressive Mode" in the "Pic-
ture" menu ➝ For settings, see page
Note
•
2D Progressive
This function is useful to display fast-
moving images such as sports and ac-
tion films. This mode optimizes the im-
age in a displayed frame.
•
3D Progressive
This function is useful to display relatively
slow-moving images such as drama and
documentary more clearly.
This mode optimizes the image by esti-
mating the movement of a number of pre-
ceding and succeeding frames.
•
Film Mode
Reproduces the image of film source
clearly. Displays the optimized image of
film transformed with three-two pull down
(NTSC and PAL60Hz) or two-two pull
down (PAL50Hz and SECAM) enhance-
ment to progressive mode images.
* The film source is a digital video record-
ing with the original encoded as is at 24
frames/second. The projector can con-
vert this film source to progressive video
at 60 frames/second with NTSC and
PAL60Hz or at 50 frames/second with
PAL50Hz and SECAM to play back a
high-definition image.
• When using progressive inputs, these
inputs are directly displayed therefore 2D
Progressive, 3D Progressive and Film
Mode cannot be selected. These modes
can be selected in interlace signals other
I
than 1080 .
• In NTSC or PAL60Hz, even if the 3D Pro-
gressive mode has been set, the three-
two pull down enhancement will be en-
abled automatically, when the film source
has been entered.
• In PAL50Hz or SECAM, the two-two pull
down enhancement will be enabled only
in the Film Mode, when the film source
has been entered.
38.
-41