Saving Projected Images; Capturing The Image; Deleting The Captured Image - Sharp Notevision PG-M20X Operation Manual

Saving Projected Images

• This projector allows you to capture projected images (RGB signals) and set them as a
startup image, or background image when no signals are being received.
• You can capture the images that are input using analog RGB signals and Digital DVI XGA
signals.

Capturing the Image

Select "Image Capture" in the "Options
(1)" menu ➝ For details, see page 38.
1
Press
" Save Image" and press
• The projected image is captured. It
may take some time for capturing.
2
1 1 1 Press
1 1
"Yes".
2 2 2 2 2 Press
Note
• This function only works in 1024 x 768
(XGA) with the exception of 43 Hz vertical
which is a interlaced signal.
• The saved image is reduced to 256 col-
ors.
• Images from equipment connected to IN-
PUT 2 or INPUT 3 cannot be captured.
Deleting the Captured
Image
1
Select "
.
2
1 Press 1 1 1 1
"OK".
2 2
2 Press 2 2
56
-56
or to select
.
or to select
.
Delete" and press
or to select
.