Epson PowerLite 8000i User Manual page 35

4. Tighten the screws on all connectors.
Connecting the Mouse and Serial Cables
If you want to use the remote control as a mouse or use the ELP
Link IV software, you need to connect the main cable. It provides
connectors for:
Refer to this illustration while following the steps below.
The PS/2 mouse or USB cable (to use the remote control as a
mouse)
The serial cable (to use the ELP Link IV software)
Mouse/Com 1 port
9-pin serial cable
main cable
PS/2 or USB cable
Connecting to a Computer
25