Turning The Equipment On And Off - Epson PowerLite 8000i User Manual

3. Connect the RCA plugs to the external amplified speaker or PA

Turning the Equipment On and Off

It's best to turn on the projector and its attached equipment in the
following order:
1. Video source (such as a VCR), if your video source is not your
2. Audio source (if different from computer or video source)
3. Computer
4. External amplified speaker or PA system (if necessary)
5. Projector (follow the steps in the next section)
When you are ready to turn off the equipment, turn them off in the
reverse order.
Note: EPSON offers the Mediaphile PAS (personal audio system) and
the Mediaphile CVS (clear voice system) for external amplification.
See page 5 for ordering information.
system. Insert the cable's red plug into the Audio R port, and the
white plug into the Audio L port.
Note: The internal speakers are disabled when an external audio
system is used.
computer
Turning the Equipment On and Off
57