Installing The Software; Connecting Needed Cables; Installing The Software For Windows - Epson PowerLite 8000i User Manual
Epson lcd projector user's guide powerlite 8000i, powerlite 9000i
Hide thumbs
Also See for PowerLite 8000i:
- Specifications (2 pages) ,
- Quick setup (2 pages) ,
- User manual (1 page)
Table of Contents
Advertisement
Installing the Software
Connecting Needed Cables
Installing the Software for Windows
4 • Using ELP Link IV
102
ELP Link IV software can be used with the following operating
systems:
Windows 3.x
Windows 95 or 98
Windows NT 3.51 or 4.0
Macintosh OS System 7.5.1 and OS System 8.x.
Before installing the ELP Link IV software, make sure the projector is
properly connected to your computer with the main and serial cables.
See Chapter 1 for instructions.
Follow these steps to install ELP Link IV for Windows 3.x,
Windows 95 or 98, or Windows NT:
1. Turn on your computer and start Windows.
2. Insert the Projector Software CD into your CD-ROM drive.
3. If you have Windows 95, 98, or NT, the ELP Link IV Setup
window should open automatically. If if doesn't, click Start and
then Run. The Run dialog box appears. Type E:\SETUP
(substitute the correct drive letter for your CD-ROM drive if it is
not E), then press Enter or click OK.
Advertisement
Table of Contents
