Epson PowerLite 8000i User Manual page 40

2. Connect the other end of the video cable to the laptop's video
3. Tighten the screws on all connectors.
Connecting the Mouse and Serial Cables
If you want to use the remote control as a mouse or use the ELP
Link IV software, you need to connect the main cable. It provides
connectors for:
Refer to this illustration while following the steps below.
1 • Setting Up the Projector
30
(monitor) port.
The PS/2 or USB cable (to use the remote control as a mouse)
The serial cable (to use the ELP Link IV software)
Mouse/Com 1
port
main cable
PS/2 or USB
cable
9-pin serial
cable