Starting Elp Link Iv; Starting The Program From Windows - Epson PowerLite 8000i User Manual

Starting ELP Link IV

Follow the steps in the appropriate section below to launch the
software. If you're using the remote control as a mouse, use the Enter
button to position the cursor and click the Enter button to launch the
software.
Note:
If you have a Macintosh, your screens may look slightly different than
the screens in this chapter.
If you have questions while using ELP Link IV, choose Help Topics
from the Help menu.

Starting the Program from Windows

1. If you have Windows 95, 98, or NT, click Start, select
Programs, ELP Link IV, and then click the ELP Link IV
program icon. If you have Windows 3.x, double-click the
ELP Link IV program icon in the Windows 3.x ELP Link IV
program group.
The ELP Link IV program icon appears minimized at the bottom
of your screen, or on the taskbar if you're running Windows 95,
98, or NT.
Starting ELP Link IV
105