Assigning The Logo To The A/V Mute Button - Epson PowerLite 8000i User Manual

Assigning the Logo to the A/V Mute Button

96
3 • Using the Projector Menus
8. Use the arrow buttons on the control panel or the Enter button
on the remote control to select a zoom rate, and then press Enter.
9. When the message "Do you save this user logo?" appears, select
Yes and press Enter. If you do not want to save the logo, select
No.
Note: Saving the logo may take a few moments. Do not use the
projector or other sources (computer, video, speaker, etc.) while the
logo is being saved.
10. When you see the message "Saving the user logo is completed,"
press the Menu or Enter button to redisplay the Main menu.
Follow these steps to assign the logo to the A/V Mute button:
1. Press the Menu button on the control panel or remote control to
display the menu (if not already displayed).
2. Select the Setting menu and then press the Enter button on the
control panel or remote control.
3. Select Logo from the A/V Mute options.
4. Press the Menu button on the control panel or remote control.
Now you can press the A/V Mute button on the control panel or the
remote control to display the user logo. Press it again to turn off the
logo.