Epson PowerLite 8000i User Manual page 41

1. Connect the round end of the main cable to the projector's
Mouse/Com 1 port. (Use the Mouse/Com 2 port if you are
connecting a second computer.)
2. To use the remote control as a wireless mouse, connect the PS/2 or
USB cable included with the projector to the MOUSE terminal
on the square end of the main cable.
3. Connect the 6-pin (mini-DIN) end of the PS/2 mouse cable to the
external mouse port or connect the USB cable to the USB port on
your laptop.
Note: If your laptop uses a serial mouse, perform steps 2 and 3 using
the PC serial mouse cable instead of the PS/2 or USB cable (not
shown in the illustration).
Connecting to a Computer
31