Resume Function - Sharp DV-NC70W Operation Manual

Resume Function

This function enables you to resume the playback from the location
you specify.
1
Press ËSTOP at the desired point during playback.
"RESUME" appears followed by "RESUME" on the screen.
This product stores the location where you stopped.
2
Press ûPLAY to restart play.
Play resumes from a point slightly before the point where it
was stopped.
Press ûPLAY to resume disc play, if auto-playback starts
from the beginning of the disc when you reload the same disc
after removing it.
Resume information will not be cancelled even if the power is turned
off.
The continued playback described here may not be possible on some
discs (such as discs that automatically start playing when the disc tray
closes).
The resume operation does not work in the following cases
– VIDEO CDs with PBC mode playback.
– MP3 file playback.
This resume operation is cancelled in the following cases.
• If you press ËSTOP twice.
• If you press ËSTOP during auto-playback.
• When you open the disc tray.
• After enabling the Resume function.
98
GB
DVD
RESUME
To CANCEL RESUME PLAY
PRESS STOP
VIDEO
C D
DVD C D
DVD
VIDEO
C D
C D
DV- NC70W
DV- NC70
DV- NC70X
TIMER
OPERATE
ON/OFF
ON VCR/DVD VCR MENU
DISPLAY
SCREEN SELECTOR DVD SETUP
FUNCTION PROG/
ANGLE
CONTROL REPEAT
TITLE
DVD MENU
CLEAR
RETURN
ZERO BACK
SKIP SEARCH
AM/PM INPUT SELECT VCR DVD
/
REV
PLAY
REC
PAUSE/STILL
STOP
TAPE DPSS
SPEED SKIP
AUDIO
CH
OUTPUT
VCR DVD
VCR/DVD COMBINATION
G-CODE
PROG
EJECT
OPEN/
CLOSE
SET
ENTER
FWD
SLOW