Sharp DV-NC70W Operation Manual page 77

6
Press Æ Æ Æ Æ Æ REC.
The images on the DVD disc are recorded onto the VCR
cassette.
When the VCR is in stop mode, the channel returns to the previ-
ously received channel.
The VCR/DVD SELECTOR is fixed to VCR in the Tape Editing
\
mode (VCR DVD indicator lights up).
Operate the VCR/DVD SELECTOR after pressing VCR\ \ \ \ \ DVD,
and after the Tape Editing mode has been cleared (VCR
indicator stops lighting up).
The following are not signs of trouble.
1 The brightness of images from regular DVD disc playback and
from discs played in Tape Editing mode might vary.
2 The discs playing time and the Real time counter slightly vary when
recording.
The DVD/VCR output jacks become VCR fixed.
The following operations cancel the DVD/VCR output and return to the
regular external input.
1 Programming the timer.
2 Setting the recording ending time during Pause.
3 Turning OPERATE on or off after entering the Tape Editing mode.
Copy protected DVD discs cannot be recorded (The image will be
distorted, when Æ Æ Æ Æ Æ REC is pressed).
If the DVD on screen display is "ON" while recording, the display will
also be recorded.
The recordings, which you make from TV/radio broadcasts or audio
sources (such as records) are for your own private use, and cannot be
used without prior permission or consent of the author.
Recording a DVD Disc onto a Video Cassette
OPERATE
\
DVD
DISPLAY
FUNCTION
CONTROL
TITLE
CLEAR
RETURN
AM/PM
/
REV
REC
TAPE
SPEED
G-CODE
DV- NC70W
PROG
DV- NC70
DV- NC70X
TIMER
EJECT
ON/OFF
ON VCR/DVD VCR MENU
SCREEN SELECTOR DVD SETUP
OPEN/
PROG/
ANGLE
REPEAT CLOSE
DVD MENU
SET
ENTER
ZERO BACK
SKIP SEARCH
INPUT SELECT VCR DVD
FWD
PLAY
PAUSE/STILL
STOP
DPSS
SKIP SLOW
AUDIO
CH
OUTPUT
VCR DVD
VCR/DVD COMBINATION
75
GB