A-B Repeat - Sharp DV-NC70W Operation Manual

C D
DVD C D
DVD

A-B Repeat

A-B repeat allows you to repeat specified section on the disc.
1
Press (REPEAT) three times while a disc is playing.
2
While you are playing a disc, press ENTER when you reach the
start of the section to be repeated.
3
While the disc is playing the same chapter/track, press ENTER
again when you reach the end of the section to be repeated.
A B
DVD
The A-B repeat begins from the point where you specified in
step 2.
Press (REPEAT) to turn off the " " indicator when returning
to regular playback.
To cancel A-B repeat, press Ë Ë Ë Ë Ë STOP, TITLE or DVD MENU.
A-B repeat can only be used within the same title/track.
(On some DVD discs, A-B repeat is restricted to the same chapter.)
If the title/track finishes before specifying the ending location (B), the
location where the title/track finishes will be set as the ending location (B).
The A-B repeat function cannot be used during programmed playback.
If the DVD Front Panel display does not show the elapsed playback time
while a disc is playing, A-B repeat playback cannot be used for that disc.
The A-B repeat function does not operate in scenes where different
camera angles are recorded.
The A-B repeat function cannot be used on VIDEO CDs with PBC
mode playback.
Repeat playback cannot be used during programmed playback.
VIDEO
VIDEO
C D
C D
Repeat Playback
DV- NC70W
DV- NC70
DV- NC70X
TIMER
OPERATE
EJECT
ON/OFF
ON VCR/DVD VCR MENU
DISPLAY
SCREEN SELECTOR DVD SETUP
FUNCTION PROG/ OPEN/
ANGLE
CONTROL REPEAT CLOSE
TITLE
DVD MENU
CLEAR SET
RETURN ENTER
ZERO BACK
SKIP SEARCH
AM/PM INPUT SELECT VCR DVD
/
REV FWD
PLAY
REC
PAUSE/STILL
STOP
TAPE DPSS
SLOW
SPEED SKIP
AUDIO
CH
OUTPUT
VCR DVD
VCR/DVD COMBINATION
G-CODE
PROG
97
GB