Timer Recording - Sharp AE-X127J Operation Manual

TUNER TAPE
CD (BAND) (I- 2) VIDEO/AUX
STAND-BY m 1 l
SLEEP
MEMORY/ I=
TUNING/TIME ( / )
V A
n
Sleep
operation
The radio, compact disc and cassette deck can all be
turned off automatically.
1
Play back the desired sound source.
"SLEEP" is displayed.
To change
the sleep time:
Whilst the sleep time is displayed, press the TUN-
ING/TIME (V or ) button to adjust the time.
A
(Maximum: 3 hours - Minimum: 1 minute)
The amount of sleep time can also be changed during
the sleep operation.
4
The unit will turn off automatically after the preset
sleep time has elapsed.
Note:
duration until the setting is changed.
To
confirm the sleep timer setting:
Press the TIMER/SLEEP button.
To
cancel the sleep operation:
Press the TIMER/SLEEP button repeatedly until
"SLEEP" disappears.
correct.
n
Timer playback
1
Set the ON/STAND-BY switch to ON.
2
Press the CD, TUNER (BAND), TAPE (l-2) or VIDEO/AUX
button to select the desired function.
3
Press the TIMER/SLEEP button repeatedly until "Q is dis-
played.
4
Press the TUNINWIME (V or
which to start, and then press the MEMORY/SET button.
5
Press the TUNING/TIME (v or
at which to start, and then press the MEMORY/SET button.
The power will be automatically turned off, and the time will
be displayed.
6
When the preset time is reached, the volume will increase
gradually until it reaches the volume you were listening to
before turning off the unit.
7
If you select CD or TAPE during timer playback, the power
will be turned off after the tape or CD is finished playing back.
If you select TUNER or VIDEO/AUX, the power will be turned
off one hour later.

Timer recording

1
Set the ON/STAND-BY switch to ON.
Load a cassette for recording into the TAPE 2 cassette com-
partment.
2
Press the TUNER (BAND) or VIDEO/AUX button to select
the desired function.
3
Press the TIMER/SLEEP button repeatedly until "0" and
"REC" are displayed.
4
Press the TUNING/TIME (V or
which to start, and then press the MEMORY/SET button.
5
Press the TUNINGRIME (v or
at which to start, and then press the MEMORY/SET button.
The power will be automatically tuged off, and the time will
be displayed.
6
When the recording tape reaches its end, the timer recording
will end, and the power will be turned off.
When the timer recording is started, the volume level is set
to "0".
When using the unit after completion of timer recording, adjust
the volume level.
To
cancel timer operation:
Set the ON/STAND-BY switch to ON.
To
change the programmed contents:
Start again from step 1.
Note:
setting is changed.
14
) button to set the hour at
A
) button to set the minute
A
) button to set the hour at
A
)
button to set the minute
A
until the