Sharp AE-X127J Operation Manual page 26

DISC SKIP
RANDOM
n
Random play
(Remote control operation)
The tracks on the disc can be played in random order
automatically.
1 Load the CD(s) and close the disc tray.
l "R" will appear.
To cancel
random play:
Press the F / c button.
Note:
n
(CD ) button, or switch off the power when you
have finished listening.
Otherwise, the disc will play continuously.
n
Disc number selection
1
When stopped, press the DISC SKIP button.
Press the ) / c button.
The next disc playback will begin, after which each following
disc will be played sequentially.
Notes:
When the DISC SKIP button is pressed during playback, play-
back will begin automatically from the next disc. (It is not
DISC SKIP
necessary to press the F /c button.)
When one of the disc number buttons (@l-@3) is pressed
during playback, play back of the selected disc will begin auto-
matically. (It is not necessary to press the ) / c button.)
(Auto Program Search System)
APSS automatically locates the beginning of any track.
To listen to the track being played again:
Press the H1 button for less than 0.5 seconds during playback.
To move to the beginning of the next track:
Press the H button for less than 0.5 seconds during playback.
button repeatedly until the desired track number is shown.
button whilst in the stop mode to select the track number,
and then press the ) /c button.
Note:
n
Cue and review
1
Load the CDs and begin playback.
Hold the m button down for audible fast forward, and hold
the 44 button down for audible fast reverse.
Normal playback will resume when the 44 or m button is
released.
Note:
appear on the display. (Even though the next disc has been
loaded, the disc will not be switched.)
Press the a button for fast reverse or press the n (CD
button to stop CD operation.
4
n
)