Sharp AE-X127J Operation Manual page 27

1
2
3
Selected disc number
Selected track number Playback order
(Automatic Programmable Music Selector)
You can play back the tracks
positions in any order desired. By specifying the disc numbers
from 1 to 3, and the track numbers from 1 to 99, you can choose
up to 32 selections for playback in the order you like.
1
When in the stop mode, use the disc number buttons ( @I I
2
Press the H1 or w button to select the desired track.
quence is being entered into memory.
4
Repeat steps 1 - 3 for any other track. Up to 32 tracks can
be programmed.
Press the ) /c button to start playback of programmed se-
lections.
5
To clear the programmed selections:
CLEAR
(Remote control operation)
Press the CLEAR button whilst the disc is stopped.
beginning with the last track programmed.
Notes:
Opening the disc tray automatically cancels the programmed
sequence.
Even if you set the ON/STAND-BY switch to STAND-BY or
the function is changed from CD to some other function, the
programmed selections will not be cleared.
During APMS operation, random play is not possible.
n
Repeat play
All tracks on up to 3 discs, or a programmed sequence can be
continuously repeated.
To repeat all tracks on up to 3 discs:
Press the F /c button and press it again.
To repeat a programmed sequence:
Programme a sequence of up to 32 tracks.
2
Press the ) /c button and press it again.
To cancel repeat play:
Press the ) /c button again.
Note:
l When using repeat play, be sure to press the H (CD i) but-
ton, or switch off the power when you have finished listening.
Otherwise, the CD(s) will play endlessly.
on the CDs in the disc 3