Sharp AE-X127J Operation Manual page 8

TIPS ABOUT AUTO MODE:
in the AUTO MODE, the
temperature setting and
mode (HEAT, COOL or
DRY) are automatically se-
lected depending on the
room temperature and out-
door temperature when the
unit is turned on.
Press the MODE button to select the
mode.
AUTO HEAT COOL DRY FAN ONLY
Press the ON/OFF button to start operation.
red
l The OPERATION
light up.
Press the THERM0 button to set the desired
temperature.
In the AUTO and DRY
mode, the indicator bars
V
represent changes in
temperature.
In
the manual HEAT and COOL mode, the tem-
perature can be set within the range of 18 to 32
In the
FAN ONLY
be set.
Press the FAN button to set the desired fan
speed.
AUTO HIGH
In the DRY mode, the fan speed cannot be
l
changed.
In the FAN ONLY mode, the fan speed AUTO
l
cannot be set.
again.
The red OPERATION lamp on the indoor unit will
l
go out.
0
26
21
The figures in
operation
lamp on the indoor unit will
2°C higher
1°C higher
1 "C lower
2°C lower
mode, the temperature cannot
LOW SOFT
18 31 34
outdoor temp
are temperature settings.