How To Use The Remote Control - Sharp AE-X127J Operation Manual

LOADING BATTERIES
1
Slide open the remote control
cover as shown.
continue to pull the cover in
Now
the same direction to completely
remove it.
2
Insert the batteries in the com-
partment, making sure the @
and 0 polarities are properly
aligned.
6:00 will appear on the
l
display when the batteries are
properly loaded.
NOTES:
The battery life is approximately one year with normal use.
l
When you replace the batteries, always use two new ones of the same type.
l
If the remote control does not operate normally after replacing the batteries,
l
take out the batteries and replace them again after 30 seconds.
If you will not be using the unit for a long time, remove the batteries from the
l
remote control.

HOW TO USE THE REMOTE CONTROL

Point the remote control towards the indoor
unit's receiver window and press the de-
sired button. A beep will sound when the
indoor unit receives the signal.
Make sure no objects, such as curtains, are
l
between the remote control and the indoor
unit.
l The remote control can operate up to 7me-
ters away, when the batteries are in good
condition.
Use two size-AAA (R03) batteries.
remote control