Vertical Air Flow; Horizontal Air Flow - Sharp AE-X127J Operation Manual

VERTICAL AIR FLOW

The direction of the air flow is automatically preset
mode as follows;
COOL and DRY mode
HEAT and
FAN ONLY
HOW TO ADJUST THE AIR FLOW DIRECTION
Press the SWING button of the
remote control once.
The vertical adjustment louvre
l
will swing continuously within
the range of 80'.
Press the SWING button again
when the desired position is
reached and the louvre will stop.

HORIZONTAL AIR FLOW

Hold the horizontal adjustment
louvres as shown and adjust
the air flow direction.
Never attempt to adjust the vertical adjustment louvres manually.
Manual adjustment of these louvres can cause the unit to malfunction when remote-
l
controlled later.
When the vertical adjustment louvres are adjusted completely downward during COOL
l
and DRY modes for an extended period of time, condensation might form.
for the optimum effect in each
Horizontal air flow
mode Diagonal air flow
Adjustment range
COOL and DRY mode
The range is narrower to
prevent condensation
from forming.
HEAT and FAN ONLY mode
The range is wider for in-
creased air circulation.