Basic Operations; Camera Recording; Selecting The Camcorder Mode - Sharp ViewCam VL-NZ100S Operation Manual

Basic Operations

Basic Operations
Playback

Camera Recording

Selecting the Camcorder Mode

This camcorder includes functions for use as both a video
camera for recording and playing back images on tapes and as
a digital still camera for recording and playing back still images
on cards. One of the following camcorder modes needs to be
set before starting any operation.
Camcorder modes
TAPE-CAMERA mode
For recording motion and still images on a
tape.
1
Set the Media Selection
switch to TAPE.
2
Hold down the Lock button
and set the Power switch
to CAMERA.
CARD-CAMERA mode
For recording still images on a
card.
1
Set the Media Selection
switch to CARD.
2
Hold down the Lock button
and set the Power switch
to CAMERA.
Note:
• To turn the power off, set the Power switch to OFF without pressing the Lock button.
Caution:
• Do not change the camcorder mode by operating the Media Selection switch during recording or
playback, as this may cause damage to the tape or card.
19
TAPE-VCR mode
For playing back or editing motion and still
images recorded on a tape.
1
Set the Media Selection
switch to TAPE.
2
Hold down the Lock
button and set the Power
switch to VCR.
Lock button
CARD-VCR mode
For playing back still images recorded on a
card.
1
Set the Media Selection
switch to CARD.
2
Hold down the Lock
button and set the Power
switch to VCR.
Lock button
Power switch
Media Selection switch
Lock button
Lock button