Recording In Lp (Long Play Recording) Mode - Sharp ViewCam VL-NZ100S Operation Manual

Recording in LP (Long
Play Recording) Mode
Available mode:
TAPE-CAMERA
This camcorder allows you to record in LP
(Long Play Recording) mode for approximately
50% more recording time with the same picture
quality as that in SP (Standard Play Recording)
mode.
1
In TAPE-CAMERA mode, press the
MENU button until the menu screen
appears.
2
Press l or m on the operation button
to select Y, then press the SET button.
3
Press l or m to select "TAPE SPEED",
then press the SET button.
S E T T I NG 2
D G T L Z OOM
T A P E S P E E D
D I S
1 6 9 :
A UD I O MOD E
R E T U R N
4
Press l or m to select "LP", then press
the SET button.
LP
T AP E SP E ED
5
Press the MENU button to turn off the
menu screen.
• The long play recording mode indicator
only appears when the on-screen
indicators are turned on.
AU T O
Long play recording
mode indicator
To return to SP mode
Select "SP" in step 4 above.
Notes on the use of LP mode
• To record in LP mode, be sure to use a Mini
DV cassette labelled for use with LP mode.
• Frozen images, mosaic-pattern picture noise,
audio interruptions or audio loss may occur in
the following cases:
—When using a tape which is not designated
for use with LP mode.
—When a tape recorded in LP mode under
high temperature conditions is played
back.
—When a tape recorded in LP mode with the
camcorder is played back on a Mini DV
player or camcorder from another manu-
facturer.
—When a tape recorded in LP mode is
played back on a Mini DV player or
camcorder without an LP function.
• Audio dubbing is not possible with LP mode
recording.
S P
L P
L P 4 5 min
36