Tape Playback - Sharp ViewCam VL-NZ100S Operation Manual

Quick Operation Guide
REC START/STOP button
Power Zoom control/Volume control
SET button
Operation button
Media Selection switch
Easy Camera Recording
on Tape
1
Insert a cassette into the camcorder.
2
Set the Media Selection
switch to TAPE.
3
Hold down the Lock button and set the
Power switch to CAMERA.
• The picture from the lens now displays.
Lock button
AU T O
4
Press the REC START/STOP button to
begin recording.
To pause recording
Press the REC START/STOP button again.
iii
Zooming
Push the Power Zoom control to T (1) (tele-
STILL button
photo) or W (2) (wide angle) side.
Power Zoom control

Tape Playback

1
Set the Media Selection
Power switch
switch to TAPE.
2
Hold down the Lock button
and set the Power switch to
VCR.
3
Press j (or k) on the Operation button
to rewind (or fast forward) the tape to the
desired point.
4
Press m to begin playback.
To stop playback
Press l.
RE C
Volume Control
Push the Volume control to the L or + side to
increase (1) or decrease (2) the volume.
Lock button
Volume control