Program Search - Sharp Viewcam VL-H410X Operation Manual

RETURN/SEARCH button
PROG. SEARCH PROG. SEARCH
R E W ,
Example:
To rewind the tape to the beginning of five different recordings
Monitor display
Tape position
(First recording)

PROGRAM SEARCH

Program Search mode automatically returns the tape
to the beginning of a number of previously recorded
scenes A total of 10 different scenes can be found
on one tape
Set the Operate switch to VCR
The "REW" or "FF" indicator starts flashing on
l
the monitor.
To cancel, press the RETURN/SEARCH button
again.
The tape rewinds or fast forwards to the
l
beginning of a recording.
Playback starts automatically when the
beginning of the recording is found. The
indicators on the monitor automatically go off
after about 10 seconds.
previous recording, press the REW button again
while the indicators are on.
(Last recording)
Notes:
Program Search functrons when the video cassette
l
stopped or durtng playback.
Returns the tape to the Immediately prevrous recording
l
possible
In steps 2 and 4, if the tape at a point ahead of the
IS
l
most recent recordrng, the "REW" indicator will flash and
the "FF" indicator will not appear.
In steps 2 and 4, If the tape is at a point before the most
l
recent recording, the "FF" indicator will flash and the
Does not function with recordings that are shorter than 10
l
seconds.
. If the video cassette was removed after the recordings
were made, Program Search does not function
IS
32