Recording The Date And Tlme - Sharp Viewcam VL-H410X Operation Manual

MENU
MENU 1
DATE/T I ME
DISPLAY OFF
l
OFF
SET
DATE/T I ME
4
DATE/T I ME
l
6
MENU 1
DATE/T I ME
MENU
RECORDING THE DATE AND
TIME
Follow the procedure shown below to record the
date and time, or the date only,ialong with the
subject.
Set the Operate switch to CAMERA.
Press the MENU button to display MENU 1.
If MENU 2 is displayed, press the PAGE button
I
Press the V or A button to move the ) pointer
to "DISPLAY".
ll:SYDNEY
Press the SET button to select "AUTO", "ON", or
"OFF".
When "ON" is selected,
continuously displayed and recorded along with
MENU 1
the subject.
When "AUTO" is selected,
OFF
displayed and recorded for IO seconds at the
beginning of the first recording that day.
When "OFF" is selected,
neither displayed nor recorded.
Note:
Select "AUTO" if continuous date/time display annoys you
during recording.
to "SELECT".
MENU 1
"DATE".
ON
Both the date and the time are displayed and
recorded when "DATE+TIME" is selected; only
the date is displayed and recorded when "DATE"
is selected.
ON
display, and then press the REC START/STOP
button to start recording.
Notes:
If you want to record the date and time again for 10
l
seconds after the date and time display disappears,
select "AUTO" again following the procedure 2 to 4
above.
After 10 seconds of recording and display, even if the
l
date has changed, the date and time will not be
displayed or recorded. Select AUTO or ON again, as in
step 4 above.
the date/time is
the date/time is
the date/time is
28