Setting The Date And Time - Sharp Viewcam VL-H410X Operation Manual

MENU 1
DATE/T ME
OFF
l SUMR TIME
OFF
SETT I NG
4
1.1994
6
12:00 AM
7
AM
2. 6;:1'9&-
12:00 A'M' '
2.
6.1995
9
1 0
2. 6.1995
11
30 AM
10:

SETTING THE DATE AND TIME

Example:
Setting the date to 2 June 1995 (2. 6. 1995) and the
time to IO:30 am (IO:30 AM) in Sydney.
Notes:
Check that the memory backup lithium battery has been
l
The date and time, once set, are stored in memory.
l
1
Set the Operate switch to CAMERA.
2
Press the MENU button to display MENU 1.
If MENU 2 is displayed, press the PAGE button
MENU 1 on the monitor.
3
to select AREA.
Press the V or A button
4
Press the SET button until "11:SYDNEY"
appears.
See the Time Zone Chart on page 19 for time
l
zone numbers and representative city for each
zone.
5
Press the v or A button to move the F pointer
to "SETTING", and then press the SET button.
(At this time, "1 .l .1994, 12:OO AM" is displayed
with the "1" flashing.)
When the memory backup is not operating,
l
e.g. when the VIEWCAM is first received from
the factory, the pointer automatically points at
this item.
Press the v or A button to select "2.
and press the SET button.
Press the v or A button to select "6." (month),
and press the SET button.
A
Press the v or button to select "1995"
(year), and press the SET button.
A
Press the v or button to select "10 AM"
(hour), and press the SET button.
A button to select "30"
(minutes), and press the SET button.
The internal clock starts operating when the
l
SET button is pressed.
Press the MENU button, and the menu will
disappear from the monitor.
Note:
The menu display is automatically cancelled if no settings
within 5 minutes after the
are made MENU button is
pressed.
(day),
16