Quick Return; Edit Search - Sharp Viewcam VL-H410X Operation Manual

MODE DISPLAY button

QUICK RETURN

When you have been playing back what you have
recorded, and wish to quickly return to the end of
the last recorded scene, use the quick-return
function.
Set the Operate switch to CAMERA.
The tape begins winding or rewinding to the
l
end of the last recorded scene.
recorded scene, the VIEWCAM enters Recording
Standby mode.
Note:
The Quick Return will not function if the video cassette
has been removed since the last recording, or if no
recording has been made since the video cassette was
loaded.

EDIT SEARCH

This VIEWCAM lets you search, without switching
from Camera Recording mode to VCR mode, for the
point on the tape where you wish to start recording
next.
In Recording Standby mode, make sure that the
auto/manual indicators or other operation
indicators are not displayed on the monitor.
(If they are displayed on the monitor, turn them
off by pressing the MODE DISPLAY button.)
Hold down the Edit Search @ button (0) or Edit
Search @ button (0) for more than one second.
When you find the point where you want to begtn
recording, release the button.
Notes:
Some picture noise appears during reverse edit search.
l
Forward edit search is performed at the same speed as
l
normal playback, and reverse edit search at three times
the normal playback speed.
26