Uploading An Html File; Viewing The Html Templates On A Pc - Ricoh RDC-i700 Operation Manual

Uploading an HTML File

Check the connection conditions and upload the file.
A Select [SEND].
A connection will be established and the
HTML file and the embedded images will be
uploaded.
When uploading is finished, the connection
can be automatically terminated and the
screen will return to the Communication
menu.
• When uploading has been completed normally, new mail for which the
Note
URL (address showing the location of the file) has been recorded will
be composed and saved as a draft. To check this mail, see "Sending
Mail that is Still Composed" (P.93).
• You can check the uploaded HTML file using the camera's Web
browser or a PC browser.

Viewing the HTML Templates on a PC

This section explains how to display the list of the HTML templates on a PC
and how to delete them.
Displaying the List of the HTML Template Files
You can display the list of the HTML template files stored in the internal
memory of the camera.
A Check that the camera and PC are properly connected, that the
camera and the PC are turned on, and that the camera's mode dial
is set to [
• For information on how to connect the camera to a personal computer,
Note
see Chapter 1 "Getting Started" in 'Connecting to a Personal
Computer' operation manual.
B Start up the browser by the PC, input the IP address and display
the camera's homepage.
• "Opening the Camera Homepage on the Browser" in the 'Connecting
See
to a Personal Computer' operation manual
Subject: FTP Upload xxx.HTM
Message: (URL for FTP upload)
].
P.101 "Viewing the Web Page"
5
117