Setting The Resolution - Ricoh RDC-i700 Operation Manual

Setting an Address Using the Address Book
There are two ways to set a fax address: either select an address from the
address book, or enter the address directly in the appropriate item.
A Select [ADD. BOOK] on the fax
setting screen.
The address book setup screen will be
displayed.
B Specify the address.
Specify the address by one of the following
methods. The address specified in
[ADDRESS] will be displayed.
Choosing an Address from the List
Choose the address you want to specify from
[ADDRESS] and select [SELECT].
Entering Directly
Enter the fax number in [NEW].
• "Using the On-screen Keypad" in the 'Camera' operation manual
See
C When setting is finished, select [OK].
The address you set will be displayed on the fax setting screen (step A).

Setting the Resolution

Select for either [FINE] or [NORMAL]. The factory default setting is
[NORMAL].
• FINE : Select when you want clear printing of small letters
• NORMAL : Select when you want standard printing of ordinary sized letters
• "How to Use the Radio Button (
See
78
)" in the 'Camera' operation manual