Ricoh RDC-i700 Operation Manual page 29

Telephone Number
This is the telephone number of the connection. Input the telephone number to
which the receiving computer (modem) is connected. (Example: xxx-xxxx-xxxx)
Dial Type
If you are using an ordinary telephone line, choose the type of line. Select
for either TONE or PULSE. The factory default setting is TONE. If you are using
an ISDN or mobile phone, leave the setting on TONE.
• TONE : Short beeps are heard when dialing
• PULSE : Long beeps are heard when dialing
• If the type of telephone line is not correctly set, no connection will be
Note
made. If you do not know which type of telephone line you use,
contact the telephone company.
External Call
When making an external call from an internal phone of the office, input
numbers from 0 to 9 to set the external call number. When the external call
number is set, it is added in front of the telephone number and dialed before the
telephone number. If you do not need an external call number, leave blank.
PPP Account
Input the connecting computer's name (Example: testname)
<When the receiving computer is running Windows>
Select [Start] [Settings]
Input the computer name for the PPP account.
• The above explanation is Windows 98 based. The procedure for
Note
Windows 2000 varies.
[Control Panel] [Network] [Identification].
27
2