Ricoh RDC-i700 Operation Manual page 60

A Remove the telephone connection
cable (modular cable) from the
modular jack in the wall.
• If the connection jack for the
Note
telephone is not a modular jack, it
will need to be converted to a
modular jack. Contact your
telephone company for further
details.
B Check that the camera is turned off.
C Insert the communication card into
the PC card slot in the camera.
Make sure that the communication card is
face up and insert it firmly into the slot.
D Insert the connection cable in the
communication card.
• For details of connecting the
Note
connection cable to the
communication card, refer to the
instruction manual supplied with the
communication card.
E Insert the connector on the other end
of the cable into the modular jack.
Insert the cable fully into the jack until it clicks
into position.
F Check the modem settings.
P.60 "Checking the Modem Settings"
Connecting operation is now completed.
• When you have finished communicating, remove the camera
Note
connection cable from the modular jack and replace the telephone
connection cable.
58
Modular cable