Ricoh RDC-i700 Operation Manual page 127

Direct Upload / HTML Upload
Error Message
Too many files for Direct Upload
Cannot open files to send
Uploading ERROR
File resize ERROR
• No file selected for Direct Upload
• No file selected for FTP Upload
No Dial-up name selected
PPP ACCOUNT must be entered.
No upload server name setting
No communication card
Cannot detect IP address
Authentification failed
Connection ERROR
Cause and Remedy
Max. no. of files for uploading has been
exceeded. Reduce number of files.
File reading failure. Resend. If error persists, file
may be unusable.
Error during uploading. Check communication
settings and resend.
Change image size again or send in original size.
File has not been selected. Select file to upload.
Dial-up account has not been selected. Select
dial-up account.
PPP account has not been input. Input PPP
account in dial-up setting.
Destination server has not been registered. Set
destination server for Direct Upload or FTP server
address for FTP Upload.
Communication card has not been inserted. Insert
communication card in card slot.
Destination server setting is incorrect and IP
address cannot be obtained. Set destination
server for Direct Upload or FTP server address for
FTP Upload.
(For FTP Uoload)
FTP upload setting is incorrect. Check user
account name and password and reset.
Connection cannot be established for some
reason. Check setting for dial-up account, Direct
Upload or FTP Upload and resend.
Page
P.64
P.69
P.96
P.69
P.95
P.24
P.48
P.46
P.64
P.69
P.96
P.45
P.69
P.95
P.24
P.48
P.53
P.56
P.48
P.53
P.53
P.24
P.48
P.53
125