Rear; Base - Epson dreamio EMP-TW500 User Manual

Part names and Functions

Rear

• • • •
[Video] port
Connects to general video ports of
other video equipment.
• • • •
[HDMI ] port
Connects to video equipment or a
computer that is HDMI-
compatible.
• • • •
[D4] port
Connects to the component video
(YCbCr or YPbPr ) ports or D
port of other video equipment.
(Japan only)
• • • •
Security lock (
• • • •
[InputA]/[Input B] ports
Setup Guide
Connects to the component video (YCbCr or
YPbPr ) ports or RGB ports of other video
equipment or to a computer's video output port.
• • • •
Power inlet
Connects the power cable.

Base

6
Setup Guide
Setup Guide
Setup Guide
) p.49
Setup Guide
• • • •
Suspension bracket fixing points (4 points)
p.44
Attach the optional ceiling mount here when suspending
the projector from a ceiling.
• • • •
[S-Video] port
Inputs an S-Video signal to the projector
from other video equipment.
• • • •
[USB] port
Connects the projector to a computer
using a USB cable when using the
Cinema Color Editor.
• • • •
[Trigger out] port p.20
When the projector power is turned on, a 12 V DC
signal is output from this port. When the projector's
power is turned off or a problem with operation occurs,
the output becomes 0 V to send the projector's power
ON/OFF status to an external device.
• • • •
[Control (RS-232C)] port
Connects the projector to a computer using an RS-232C
cable when using the Cinema Color Editor.
• • • •
Air filter (air inlet)
Prevents dust and other foreign
particles from being drawn into the
projector. It should be cleaned
periodically.
Setup Guide
p.26
• • • •
[Network] port p.25
Connects the projector to a
network.
• • • •
Remote control light-
receiving area
Setup Guide
Receives signals from the
remote control.
p.26
p.40, p.42