Preparation For Using Cinema Color Editor; Installing Cinema Color Editor - Epson dreamio EMP-TW500 User Manual

Preparation for Using Cinema Color Editor

Installing Cinema Color Editor

If any other applications are open, close them before installing Cinema Color Editor.
Insert the accessory Cinema Color Editor CD-ROM into your CD-ROM drive.
Windows: The installer will start
A virus check program window will be displayed, so check the contents of this window and
then click [Continue].
The software verification window will be displayed.
Windows
Select the software
to be installed
Change the
display language
Close the installer
Start installation
Check the settings and then click [Install].
Installation will start. Follow the instructions which appear on the screen to complete the installation.
Click [Exit] to finish the installation.
If using a Macintosh a message prompting you to restart the computer may be displayed. If this
happens, follow the instructions in the message and restart your computer.
24
automatically.
If using Windows:
•
If the computer is connected by means of a USB cable, be sure to install the USB
driver (EPSON Projector USB-Virtual COM Driver).
•
If the setup program does not start automatically, click [Start] - [Run] and then
open the "Browse" dialogue box and select "[CD-ROM drive]:\Epsetup.exe" and
then click [OK].
Macintosh: Click the "Installer for Mac OS
Classic" icon or the "Installer for
Mac OS X" icon in the "EPSON"
window, depending on the
operating system you are using.
Macintosh
Select the software
to be installed
Change the
display language
Close the installer
Start installation