Problems with network connections
Projector cannot be recognized
Are the projector and the
computer correctly connected
to the network?
Has the projector been set up
correctly for connection to the
network?
Is "Network Monitoring" set to
"ON"?
Is power being supplied to the
projector?
Connect the network cable correctly.
Check the settings for the "Network" menu command.
"Setting"-"Operation" - "Network" p.20, p.27
To turn the projector's power on from a computer while the projector is
in the standby mode, you must first set "Network Monitoring" to "ON".
"Setting"-"Operation" - "Network Monitoring" p.20
Check if the power supply to the location has been interrupted, or if the
circuit breaker for the electrical outlet has been tripped.
Problem Solving
39