Table of Contents
Advertisement
Optional Andiron installation for the L900-1:
1) Remove the mesh and the glass door (see Page 30 in the manual).
2) Remove Log G from the log set - see below.
Log G
3) Slide bracket on the back of andiron over the 1st grate post.
4) Replace Log G.
1st Grate Post
Andiron Bracket
5) For the right side, slide the andiron bracket over the
4th grate post.
6) Reinstall glass door and mesh.
Regency
®
L676-1 Direct Vent Gas Fireplace
OPTIONAL ANDIRON INSTALLATION
4th Grate Post
Right Side
Final Installation L900-1
Optional Andiron installation for the L676-1:
1) Remove the mesh and the glass door (see Page 30 in the manual).
2) Remove Log B from the log set - see below.
1st Grate Post
3) Slide the bracket on the back of the andiron over the 1st grate
post.
4) Replace Log B (see below).
Note: Andiron bracket
4th Grate Post
5) For the right side, slide the andiron bracket over the
4th grate post.
6) Reinstall glass door and mesh.
Final Installation L676-1
INSTALLATION
Log B
Log B
can be adjusted by
bending.
Also the screw can
be loosened so
the bracket can be
adjusted higher or
lower.
Andiron Bracket
Adjustments
37
Advertisement
Table of Contents
